Tuesday, November 8, 2011

CUYI CTO-630 CUTTER PLOTTER

                          

                         


                 
           

This machine is used to cut out designs from different kinds of stickers like vinyl sticker, car sticker, decals, transfer paper, photo stickers, etc. Design everything on your software from a computer, send it to the machine and in a moment your design will be cut.

SAMPLE CUTS:

     





PACKAGE INCLUDES:

*MACHINE                                    *M-FRAME                                      *BLADE HOLDER
*POWER CORD                           *PEN (for plotting)                            *3 BLADES
*USB CORD                                  *CD (driver, plug-ins & manual)      *SOFTWARE (flexi)
*CRT CORD                                  *STAND


WORKS WITH:

         FLEXI                                            


COREL DRAW (plug-in)



ADOBE ILLUSTRATOR (plug-in)







FULL CHAT AND VOICE CALL SUPPORT FOR TUTORIAL AND TROUBLE SHOOTING!!




for questions/inquiries/orders :

cuyihongkong@yahoo.com (yahoo mail and messenger)

follow us on twitter:

https://twitter.com/#!/cuyihongkong

like us on facebook:

http://www.facebook.com/pages/Cuyi-DigitalHong-Kong-Co-Ltd/164903816937799

visit us on:

http://cuyihk.en.gongchang.com/



                           
Posted by at

77 comments:

  1. Lordilyn P. IgnacioMay 16, 2012 at 6:08 AM

    hello po.....im using the same model ng cuyi...ask ko lang po, kapag magcucut po kasi ako gamit ang flexi...DONE agad sya...wala namang nangyayari sa cutter,,,ano po ko kaya ang prob nun?tnx..

    ReplyDelete
  2. AnonymousJuly 31, 2012 at 4:08 AM

    Might be the BAUD set up on you machine, it should be 09600, or set-up on your model.

    ReplyDelete
  3. McMxAugust 12, 2012 at 8:52 AM

    Sir, may impotante po kaming itatanong... same model ng cuyi po... bat hindi yong nag a-appear yung online pag power on namin walang display sa lcd puro lang square, walang lumalabas na on line o yung X and Y... MARAMING SALAMAT po!!!... ASAP...=)

    ReplyDelete
  4. UnknownJanuary 22, 2013 at 8:55 PM

    Tnx sir^_^

    ReplyDelete
  5. VhinJanuary 31, 2013 at 5:17 AM

    Hello i have a prob using my CUYI CTO-630 CUTTER PLOTTER everytime i cut vinyl there is a unclosed cutted and the cut is not that accurate, instead of straight line the cut has zigzag.. how to fix this? 2nd question is how to cut a transfer paper? what are the info's?

    ReplyDelete
  6. AnonymousJanuary 31, 2013 at 12:15 PM

    Hi,

    I have a CUYI CUTTER PLOTTER CT0-630. My computer crashed and I reinstall the OS (XP pro). I need to get a driver coz my CD installer is not working. Your website doesn’t seem to have a support page for drivers. Please send me a link on where to Download the driver and how to download (download instructions). Your reply is greatly appreciated. Thank you.

    Cheers!

    PS.

    I need help of everyone here who's using same model if you know on where to DL the driver please POST the link here or in CUYI's Facebook Page http://www.facebook.com/pages/Cuyi-DigitalHong-Kong-Co-Ltd/164903816937799. Your post will be highly appreciated.

    Thank you.

    ReplyDelete
  7. MjFebruary 9, 2013 at 11:55 PM

    Good pm, can i ask for a copy of plugin for illustrator?

    ReplyDelete
  8. noobFebruary 12, 2013 at 7:27 AM

    sir CTO630 po gamit ko, everytime mag cut po ko vinyl.. may maliit po na part na hindi natatapos i-cut.. help po.. para di ako mahirapan mag linis ng stickers..

    ReplyDelete
    Replies
    1. UnknownFebruary 18, 2013 at 6:51 AM

      Sir, pwedeng mag tanong? Same model po ng Cuyi plotter ang nabili ko last week. Na install ko na mga drivers nya. Yung Flexi 10 at Corel plug-in. Ayaw parin mag cut. May Lumalabas na Message box saying "Send Over" at "Connect to Cutter fail" Na encounter yo na po ba yun? Doon sa DEVICE INFO, d ko rin po makita yung model ng plotter na supposed to CTO630. Alin po ang ginamit nyo na device sa drop down list? at anong OS at version ng Corel po ang gamit nyo? Thanks po in advance..=)

      Delete
    2. AnonymousMay 31, 2013 at 8:44 PM

      same po tayo ng problema. wala naman akong masearch sa net na solusyon.

      Delete
    3. ehmsodefAugust 3, 2013 at 9:45 PM

      Sa offset po ito ng software nyo.

      Delete
    4. UnknownDecember 6, 2013 at 4:04 PM

      Hi! Ako gamit ko is sa setting pag mag ccut ako is pag click mo yung creation plugin nilalagay ko sa ctn630 yung sakin tapos kung ano man yung port na inassign ng pc mo... sskin naka assign sa com16... ang problem ko lang ay hindi ko makuha yung tamang axis para ma cut ko ng tama yung print ko sa transfer paper... alam nyo ba tamang x and y axis setup?

      Delete
  9. UnknownMarch 23, 2013 at 1:31 AM

    Jec mendoza and i have exactly the same prob pls pls help us, to jec have resolve that prob already?

    ReplyDelete
  10. Geri FloresJune 12, 2013 at 4:53 PM

    hello i just want to ask where can i get the adobe illustrator plug in

    ReplyDelete
  11. AnonymousJune 22, 2013 at 7:15 PM

    Sino po meron driver Ng cto630 and plug in para sa corel pa share naman po pls.. Tnx.. aaron_Ines@Yahoo.com pa email na lang po

    ReplyDelete
  12. AnonymousJune 26, 2013 at 4:21 AM

    I found drivers and plugins here;

    http://start.ukcutter.co.uk/index.php?/Knowledgebase/List/Index/6/pcut-cto630cto1200

    It was the 2nd result on Google after typing in "CTO630 Adobe Illustrator". Hope it's of help! :)

    ReplyDelete
  13. UnknownJuly 10, 2013 at 6:50 PM

    Jec MendozaFebruary 18, 2013 at 6:51 AM.. same problem PO . sana may solution

    ReplyDelete
  14. AnonymousAugust 1, 2013 at 2:16 AM

    hi goodday. pwede ko po ba ilagay as printer seting ang cuyi? mi program po kasi ako na gamit nila pang draw ai cutter plotter. ang pag install nlng po as printer setting ang kailangan ko

    ReplyDelete
    Replies
    1. ehmsodefAugust 3, 2013 at 9:43 PM

      May software po para doon. Pwede pong corel draw, adobe illustrator, flexi at iba pang cutting softwares o drawing softwares na may plug in para dito.

      Delete
  15. ehmsodefAugust 3, 2013 at 9:40 PM

    About questions on this model, you may e-mail me at ehmkyut30@yahoo.com, Para sa maliliit na part na hindi naka-cut, nasa offset setting po ito ng software. If you are using Flexi starter it will be found at the CUT/PLOT window before sending, just click then look for the knife icon , then change its KNIFE OFFSET value. Default is .020, you may use .016 or try event lower. If you are using plug in for coreldraw and illustrator, right before you send you will see the BLADE OFFSET default is 0.38, try using 0.4 to 0.5. For drivers, please e-mail me.

    ReplyDelete
  16. AnonymousAugust 19, 2013 at 3:31 PM

    i lost my usb dongle, how can i replace it.... any other option... ty

    ReplyDelete
    Replies
    1. UnknownNovember 4, 2018 at 1:37 AM

      need ba ng dongle ang cuyi wla ksi ako dongle dito ct0630 unit ko. thanks

      Delete
  17. UnknownFebruary 28, 2014 at 5:18 PM

    Help po sa Cto630 ko. nainstall ko po ng maayos lahat driver at flexi10 pero pagnagkacut na ako, working laser ang lumalabas sa lcd nya tapos di sya nagkacut.. patulong nman po.. thanks!!

    ReplyDelete
    Replies
    1. AnonymousSeptember 28, 2020 at 3:15 AM

      same problem here pano kaya yan pls. help;nman

      Delete
  18. UnknownMarch 13, 2014 at 6:17 AM

    sir hindi po madetect ng pc ko yung cutter plotter ko...hindi po usb port gamit ko yung parang VGA po..lumalabas yung dialog box sa corel pero hndi po xa nagload pag click ko yung send nag color gray lang yung options..wat to do po thanks

    ReplyDelete
  19. UnknownMarch 16, 2014 at 1:58 PM

    help din po about s working laser problem pag i align na po ung cutter point n labas n po ung working laser s LCD

    Model: CTO 630

    ReplyDelete
  20. UnknownMarch 21, 2014 at 11:01 PM

    guys cnu po may plugins for corelx5

    ReplyDelete
  21. AnonymousApril 10, 2014 at 6:10 PM

    Hi sino po my plugins for AI

    ReplyDelete
  22. AnonymousJune 6, 2014 at 1:34 AM

    hi, ano po kaya yung problema kapag nag-cucut naman ng maayos pag-una then biglang mapupunit ng blade yung vinyl (car vinyl)? maayos naman po pag nagtest. And parang mas nahihirapan yung cutter pag nag-cucut ng curves. Thanks.

    ReplyDelete
  23. UnknownJune 6, 2014 at 6:59 AM

    pano po i plug in sa illustrator

    ReplyDelete
  24. willieOctober 26, 2014 at 6:35 PM

    gud am, may cutter moves left to right and backwards, but the needle wont go down to cut the vinyl. help pls

    ReplyDelete
  25. UnknownMay 12, 2015 at 1:01 PM

    hi Gud day! ask lang posible ba sa windows 8 ang drivers?.. 7 lang kasi ung nakita ko pahelp namn salamat

    ReplyDelete
  26. samuelOctober 19, 2015 at 4:43 PM

    Hi po! Pls pa help naman ako diko kasi kabisado e setup cuyi 630 na nabili ko, paano po xa e set up pls thank sa mag help sakin

    ReplyDelete
  27. samuelOctober 19, 2015 at 4:45 PM

    Kelangan paba Ng adobe illustrator?

    ReplyDelete
  28. samuelOctober 19, 2015 at 4:46 PM

    Kelangan paba Ng adobe illustrator?

    ReplyDelete
  29. samuelOctober 19, 2015 at 4:58 PM

    Hi po! Pls pa help naman ako diko kasi kabisado e setup cuyi 630 na nabili ko, paano po xa e set up pls thank sa mag help sakin

    ReplyDelete
  30. AnonymousDecember 29, 2015 at 8:32 AM

    Cuyi cutter plotter working laser meron b nakaka alam n solution ska Papano yung baud 9600 san ko po yan makikita ano yung press ko s cuyi para lumabas yan baud... Ty

    ReplyDelete
    Replies
    1. UnknownMay 16, 2016 at 12:03 AM

      press mo online button para lumabas yun x and y. paglumabas na yunpress mo "mode" bawat press mo iba ibang operation lalabas. yung baud sa huling press mo yun.Pagnakuha mo na lahat ng adjuytment ng operation mo. press mo uli online button

      Delete
  31. everydaysaryDecember 30, 2015 at 5:32 AM

    pano po gagawin pag walang display ung lcd. line of blocks lng.

    ReplyDelete
  32. UnknownFebruary 5, 2016 at 6:02 AM

    Magandang Gabi Mga Sir's ask ko lang po sana kung bakit bigla nalang ngstop yung machine ko at may lumalabas na Connect to Cutter Fail! normal lang po bang nararanasan ng isang baguhang kagaya ko

    ReplyDelete
    Replies
    1. UnknownMay 15, 2016 at 11:59 PM

      ganyan din sa akin....kaya dami tapon na trabaho... parang hahanapan mo pa ng compatible na usb port sa cpu mo

      Delete
    2. JF@tonMay 21, 2016 at 10:38 PM

      unlpug usb drives

      Delete
  33. UnknownFebruary 5, 2016 at 6:06 AM

    Maraming salamat po sa sasagot

    ReplyDelete
  34. _____/\__(__[_____March 21, 2016 at 1:53 PM

    need urgent help po for some unreadable file sa flexi8 installer ... anyone who can share the needed files please send lang po link via email or facebook ...

    files needed:
    data2.cab
    engine32.cab
    haspds_windows.dll
    instmsiw.exe (from install/required folder)
    fseffects.dll (from install/non-compressed folder)

    ReplyDelete
  35. UnknownJuly 7, 2016 at 8:04 PM

    Sir ask lang po...nwala hung baud sa cuyi cto630 ko.. Flexi gmit ko .tpos nka lagay working laser. And nmn ngccut.

    ReplyDelete
  36. UnknownAugust 31, 2016 at 4:42 AM

    sir ano po pwdng gwin pg un roller wheel garalgal ang pg ikot.. pti un left n right ng blade gnun dn?

    ReplyDelete
  37. UnknownAugust 31, 2016 at 4:42 AM

    sir ano po pwdng gwin pg un roller wheel garalgal ang pg ikot.. pti un left n right ng blade gnun dn?

    ReplyDelete
  38. UnknownSeptember 12, 2016 at 12:33 AM

    Hi, nabili ko cuyi cto 630 4 yrs ago. Minsan kolang gamitin kasi lugi na ako sa makinang ito. Humihinto sa kalagitnaan ng trabaho. Buti kung mga a4 size lang ginagawa ko. Karamihan nasa 15" x 45". Kahit hatiin ko na buong design sa 4 parts ganun pa din. Sana magpaliwanag naman sila sa mga problemang it....tingin ko sakit na ng cuyi ito...gagastos lang kung gagamitin ko pa....bumili nalang ako ng bago...best solution

    ReplyDelete
  39. UnknownOctober 7, 2016 at 11:27 AM

    Bagong bili lang po tong cto 1200 bigla n lang huminto ung cuting tpos ng start ulit ako ng new job isang straight line lang gagawin nya tpos wala na anu po problema laging ganun try ko na re install same padin elp nmn po plsssss

    ReplyDelete
  40. UnknownNovember 23, 2016 at 11:41 PM

    hi yung cuyo ct0630 ko nagwoworking laser pano po ba gagawin dun salamat sa sasagot

    ReplyDelete
  41. UnknownApril 9, 2017 at 10:10 PM

    SA WORKING LASER PROBLEM ILAGAY NIYO SA PORT SETTINGS, BITS PER SECOND 38400

    ReplyDelete
  42. AnonymousApril 21, 2017 at 12:40 AM

    Hello po, pinaformat ko po ung laptop ko po , e nakalimutan ko po ung Device Info ng Cuyi cutter , ung Device po at kung sang port, baka may alm po kaung pwdng gawin dito salamat po

    ReplyDelete
  43. UnknownMay 1, 2017 at 11:47 PM

    sir tanong ko lang may generic na removal code po ba ang flexistarter 11 kasi ililipat ko sa ibang pc nasira hardisk ko eh...hinihingi yung removal code nag email na ako sa SAI pero wala ding sagot baka may ibang paraan na pede ko magamit pang cut..

    ReplyDelete
  44. JojitJune 14, 2017 at 12:40 AM

    Hi sir, I work in an NGO and we have Cuyi cutter plotter, however, we lost the installer. Pwede po pa share f ever. Eto po email ko: k.ogatis@gmail.com ... Thanks po... God bless!

    ReplyDelete
  45. AnonymousAugust 10, 2017 at 8:53 AM

    hi! anybody here knows how to install cto 630 to win10 os?

    ReplyDelete
  46. AnonymousOctober 25, 2017 at 8:33 PM

    madaming nagrereklamo pero wala mga nasagot :D

    ReplyDelete
  47. UnknownDecember 26, 2017 at 12:07 AM

    I've tested easy cut studio, this software work with cuyi CTO 630 cutter. thank you.

    ReplyDelete
  48. UnknownAugust 4, 2018 at 6:36 PM

    can i ask for cuyi cto630 driver installer? thanks

    ReplyDelete
  49. AnonymousOctober 1, 2018 at 4:17 AM

    cuyi cutter, heatpress, mugpress home service repair txt me rod-09550990140

    ReplyDelete
  50. AnonymousOctober 1, 2018 at 4:19 AM

    cuyi cutter plotter, heatpress, mugpress homeservice repair check my fb page.. thanks >>> https://www.facebook.com/photo.php?fbid=1064615180368431&set=a.100901206739838&type=3&theater

    ReplyDelete
  51. AnonymousOctober 24, 2018 at 1:53 AM

    we repair any brand of cutter, heatpress , mugpress, computer desktop/laptop, security digital video recorder, security cam installation.. >>> click my facebook dor tan https://www.facebook.com/photo.php?fbid=1064615180368431&set=a.100901206739838&type=3&theater

    ReplyDelete
  52. UnknownJanuary 23, 2019 at 8:48 PM

    how to connect my cuyi cutter cto 360

    ReplyDelete
  53. UnknownJanuary 23, 2019 at 8:48 PM

    cto630

    ReplyDelete
  54. UnknownFebruary 5, 2019 at 9:46 PM

    meron na po ba pang coreldraw x8..need badly CTO 630 plugin for coreldraw x8

    ReplyDelete
  55. UnknownApril 17, 2019 at 5:35 PM

    Cuyi mg630 cuts oblong instead of circle. It expands the width like for example you like to cut a 1x1 square. It cuts a 2x1 rectangle. The width size doubles. Help me pls.

    ReplyDelete
  56. UnknownAugust 22, 2019 at 1:15 AM

    can i cut vinyl printed in tarpaulin machine
    and how

    ReplyDelete
  57. Frances Ann GeneseAugust 27, 2019 at 7:51 PM

    Good day! we are using CUYI CTO 630g and lately, naencounter ko na pag nagcut nalulukot yung vinyl and palagi nang ganon...paano po kaya ang pwedeng gawin sa problem na ito?salamat po

    ReplyDelete
  58. ShilohAugust 28, 2019 at 1:32 AM

    Good day po! Paano po icalibrate ang cuyi cto 630? Pls help po. Thank you

    ReplyDelete
  59. Ken ReyesOctober 13, 2019 at 2:56 AM

    hello my cuyi cto 630 plotter displays "cuyi hongkong" and wont go online... key pads not responsive. please.… need help

    ReplyDelete
  60. UnknownJuly 17, 2020 at 12:38 AM

    hello, my model is cuyi cto630 na install ko na po lahat, i use Corel X3 tpos plug-in niya creation cut something like that,,nakalimutan ko kung anung driver and port yong compatible, panu po ma solve to?
    Please really need the answer.

    ReplyDelete
  61. UnknownJuly 22, 2020 at 6:19 AM

    tanong ko lang po kung meron po kayo software para sa cuyi cto630 para mapagana ko.. nasira po kasi software ng cutter plotter ko. Thanks! reply please...

    ReplyDelete
  62. UnknownAugust 29, 2021 at 8:51 PM

    Hi,

    I have a CUYI CUTTER PLOTTER CT0-630. My computer crashed and I reinstall the OS (XP pro). I need to get a driver coz my CD installer is not working. Your website doesn’t seem to have a support page for drivers. Please send me a link on where to Download the driver and how to download (download instructions). Your reply is greatly appreciated. Thank you

    ReplyDelete
  63. AnonymousAugust 26, 2024 at 12:40 AM

    Hillo po same model po cutter namin but ang problema ayaw gumana ang ebang buttons

    ReplyDelete
  64. AnonymousOctober 29, 2024 at 12:52 PM

    Respect and I have a nifty supply: How Much Do House Repairs Cost average remodel cost

    ReplyDelete
  65. AnonymousOctober 30, 2024 at 9:23 PM

    Thanks and I have a tremendous give: How Much Are House Renovations Stardew Valley renovate my home

    ReplyDelete
  66. AnonymousMay 24, 2025 at 6:40 AM

    Hello, I have CTO 630 cutterplotter Cuyi but I lost my driver. can you share with me the driver for windows 11 pro

    ReplyDelete

Subscribe to: Post Comments (Atom)